Prof. Dr. ÖMER FARUK ELALDI

Makine Mühendisliği Programı



Tel : 0312 246 6706
E-Posta : elaldi[at]baskent.edu.tr
Web : http://www.baskent.edu.tr/~elaldi/

  • Doktora (1992), Orta Doğu Teknik Üniversitesi, Malzeme Ve Metallurji Mühendisliği
  • Yüksek Lisans (1986), Boğaziçi Üniversitesi, Makine Mühendisliği
  • Lisans (1980), Boğaziçi Üniversitesi, Makine Mühendisliği

Çalışma Alanları


  • MAKİNE MÜHENDİSLİĞİ

  • MALZEME VE METALURJİ MÜHENDİSLİĞİ

Patentler


  • Elaldı F. Balistik Kompozit Zırh, BİTTO/Türk patent Başk.lığı, 24/07/2019

Projeler


  • Elyaf Takviyeli Kompozit Malzemelerin Darbe Yükü Altındaki Davranışlarının Deneysel Olarak İncelenmesi. ", Başkent Üniversitesi", BAP/Başkent Üniversitesi", 31/12/2009.

Kitaplar


  • Elaldı F, Kaynak C, Akovalı G. Chapter 7, Machining and Joining Processes. In:Güner Akovalı editors. Handbook of Composite Fabrication. Shawbury, UK: RAPRA Technology Ltd; 2001. p.150-179.

  • Elaldi F. Faruk Elaldi editors. Silah Sistemleri ve Balistik-1. Ankara: KHO; 1990

Makaleler


  • İç YT, Elaldi F, Keçeci B, Uzun GÖ. Kevlar fiber-epoksi kompozit malzemesinin frezeleme işleminin faktöriyel tasarım ve hedef programlama yöntemleriyle eniyilenmesi. Journal of The Faculty of Engineering and Architecture of Gazi University, 2019; 34(3):1549-1560. ( SCI-Exp : Science Citation Index-Expanded (SCI dahil) )

  • Elaldı F, Baykan B, Akto C. Experimental Analysis for the Effect of Impactor Geometry on Carbon Reinforced Materials. Polymers&Polymer Composites, 2017; 25(9):677-682. ( SCI-Exp : Science Citation Index-Expanded (SCI dahil) )

  • İç Y, Elaldı F, Keçeci B. TOPSIS BASED TAGUCHI OPTIMIZATION OF MACHINING CHARACTERISTICS IN END MILLING OPERATION OF KEVLAR-EPOXY COMPOSITES. Journal of Chinese Society of Mechanical Engineers, 2016; 6:653-662. ( SCI-Exp : Science Citation Index-Expanded (SCI dahil) )

  • Elaldi F, Lee S, Scott R. Processing and Environmental Effects on Composite Repairs. Materials and manufacturing processes, 2012; 27(7):255-259. ( SCI-Exp : Science Citation Index-Expanded (SCI dahil) )

  • Elaldı F. Structural Performance Efficiency Of Different Assembly Methods For Stiffened Composite Panels. J. Fac. Eng. Arch. Gazi University, 2012; 27(1):41-48. ( SCI-Exp : Science Citation Index-Expanded (SCI dahil) )

  • İpek NE, Elaldı F. Analysis of Welding Groove Angle and Geometry on Strength of Armor Steel. Materials and Manufacturing Processes, 2012; 27(12):1437-1441. ( SCI-Exp : Science Citation Index-Expanded (SCI dahil) )

  • Elaldı F, Alkan F, Çoğun F. Sıvı basıncı ile Sac Şekillendirme. Makina-Tek Dergisi, 2012; :-.

  • İç Y, Elaldi F, Pakdil F, İpek NE. Design of Experiment and Goal Programming Application for GMAW Process. Welding Journal, 2012; 91:106-112. ( SCI-Exp : Science Citation Index-Expanded (SCI dahil) )

  • Elaldı F, Elaldı P. A study on Curing Process and Environmental Effects for Rapid Composite Repair. J. of Reinforced Plastics and Composites, 2011; 30(9):749-755. ( SCI-Exp : Science Citation Index-Expanded (SCI dahil) )

  • Elaldı F. Structural Efficiency and Post-Buckling Strength of J and Hat Stiffened Composite Panels. J. of Reinforced Plastics and Composites, 2010; 29(10):1590-1594. ( SCI-Exp : Science Citation Index-Expanded (SCI dahil) )

  • Elaldi F, Colak L. Buckling and Post-Buckling Behavior of Compression Loaded Composite Panels with Hat Stiffeners. J. of Reinforced Plastics and Composites, 2009; 28:2501-2509. ( SCI-Exp : Science Citation Index-Expanded (SCI dahil) )

  • Elaldı F, Lee S, Scott R. Manufacture of Composite Panels with J-Shape Stiffeners. Materials and manufacturing processes, 2007; :-. ( SCI-Exp : Science Citation Index-Expanded (SCI dahil) )

  • Elaldi F. The Effects of a Cutout and Stacking Sequences on the Buckling Behavior of Composite Panels. Key Engineering Materials, 2007; 1:520-524. ( SCI-Exp : Science Citation Index-Expanded (SCI dahil) )

  • Elaldi F, Alecakir S. Damage Tolerance of Stiffened Composite Panels With Cutouts. J. of Reinforced Plastics and Composites, 2006; 25(13):1341-1351. ( SCI-Exp : Science Citation Index-Expanded (SCI dahil) )

  • Alecakir S, Elaldi F. Damage Tolerance of Stiffened Composite Panels with Cutouts. NATO/RTO (AVT) Technical Report, 2003; :-.

  • Akcay M, Elaldi F. Experimental Investigation of Effects of Explosive Length And Stand Off Distance On Shaped Charges. Turkish J.of Engineering And Environmental Sciences, 1997; 21:285-287. ( EI : Engineering Index )

  • Elaldi F. Design and Testing of Recoil Mechanism Used For Self Propelled Howitzers. ARI The Bulletin of The Technical University of Istanbul, 1996; 49:301-316.

  • Elaldi F. A Design Analysis for J-Stiffened Composite Panels. Journal of The Institute of Science And Technology, Gazi University, 1996; 9(3):393-.

  • Lee S, Elaldi F, Villalobos H, Scott R. Design And Manufacture of Stiffened Composite Panels. J.of Science And Engineering of Composite Materials, 1995; 4(2):-. ( SCI-Exp : Science Citation Index-Expanded (SCI dahil) )

  • Elaldı F, Akçay M. Proje Yönetiminde bir Model-Ömür Devir modeli. Türk Sialahlı kuvvetleri Dergisi, 1995; 1(2):-.

  • Lee S, Elaldi F, Villalıbos H, Scott R. Experimental and Analytical Study of J-Stiffened Panels Loaded in Axial Compression. Metal Matrix Composites, 1993; 6:519-. ( EI : Engineering Index )

  • Elaldi F, Lee S, Scott R. Design, Fabrication and Compression Testing of Stiffened Composite Panels for Aircraft Structures. LTR-ST-1872, Laboratory Technical Report of National Research Council Canada of Institute for Aerospace Research, 1991; :-.

  • Elaldi F, Lee S, Scott R. Processing and Environmental Effects on Mechanical Properties of Composite Repairs. LTR-ST-1826, Laboratory Technical Report of National Research Council Canada of Institute for Aerospace Research, 1991; :-.

Bildiriler


  • Aslan A, Elaldı F, Çetinkıran M. BİR OTOMATİK MÜHİMMAT DOLDURMA MAGAZİN SİSTEMİNİN KAVRAMSAL. SAVTEK 2018: ODTÜ, Ankara; 27/06/2018 - 29/06/2018

  • Chen J, Lee S, Wu J, Elaldi F. Manufacture of Carbon Fiber Nano-Based Epoxy Composite Laminates Using a Vacuum Assisted Resin Transfer Mold. Canadian International Conference on Composite Materials_CANCOM2017: Ottawa CANADA; 17/07/2017 - 20/07/2017

  • Elaldı F, Batkan B, Akto C. Experimental Analysis for The Effect of Impactors Geometry on Carbon Reinforced Composite Materials. AMPT 2016-Advances in Materials and Processing Technologies,: Kuala Lumpur/Malezya; 08/11/2016 - 11/11/2016

  • Baykan B, Akto C, Elaldı F. İMPEKTÖR GEOMETRİSİ VE PLAKA KALINLIĞININ KOMPOZİT MALZEMELERİN DARBE DAVRANIŞINA ETKİSİ. SAVTEK 2016-8. SAVUNMA TEKNOLOJİLERİ KONGRESİ: ODTÜ Kongre Merkezi; 12/10/2016 - 14/10/2016

  • Elaldı F. Multilayer Ceramic Composite Armor Design and Impact Tests. 37th Int. Conf. & Expo on Advanced Ceramics & Composites, ICACC 2013: Daytona, USA; 27/01/2013 - 31/01/2013

  • Elaldı F. An experimental Study on rapid composite repair techniques. European Conference on Composite Materials, ECCM15: Venicei / Italy; 24/06/2012 - 28/06/2012

  • Şanlı MA, Elaldı F. SAVTEK 2012. SAVTEK 2012: Ankara; 20/06/2012 - 23/06/2012

  • Şanlı M, Elaldı F. Çok tabakalı kompozit zırh tasarımı, üretimi ve darbe testleri. SAVTEK 2012: Ankara; 01/06/2012 - 03/06/2012

  • Çoğun F, Alkan F, Elaldı F. Design, Manufacture and Implementation of Sheet Metal Hydroforming System. 6th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, Ankara, Turkey: Ankara; 23/06/2011 - 26/06/2011

  • İpek NE, Elaldi F. The effects of welding groove angle and geometry on mechanical properties of armor steel. 63rd Annual Assembly & International Conference of the International Institute of Weldin: İSTANBUL; 11/07/2010 - 17/07/2010

  • Elaldi F, Dengiz B, Kilkiş B, Çolak L. Arası Tümleşik, Sürdürülebilir Enerji Politikalarının Geliştirilmesinde Yeni Bir Yol Haritası Ve Örnek Model. Türkiye 11. Enerji Kongresi: İZMİR; 21/10/2009 - 23/10/2009

  • Elaldi F. Post-buckling Strength and Structural Efficiency of Open and Closed-section Stiffened Composite panels. 15 th Int. Conf. on Composite Structures / ICCS15: Porto/Portekiz; 15/06/2009 - 17/06/2009

  • Elaldı F. Post-buckling Design Analysis of J and Hat Stiffened Composite Panels. 6th Asia-Australasian Conference on Composite Materials: Kumamoto University, Japan; 23/09/2008 - 26/09/2008

  • Elaldı F. Buckling, Post-Buckling and Failure Analysis of Hat Stiffened Composite Panel. 8th International Fracture Conference: Yıldız Teknik Üniversitesi İstanbul; 07/11/2007 - 09/11/2007

  • Elaldi F. Design, Fabrication and Finite Element Analysis of Hat-Stiffened Panel Under Uni-Axial Compression. The Third International Conference on Structural Engineering, Mechanics and Computation: Cape Town; 10/09/2007 - 12/09/2007

  • Elaldi F. The Effects of a Cutout and Stacking Sequences on The Buckling Behavior of Composite Panels. 5th Asia-Australasian Conference on Composite Materials: Hong Kong; 27/11/2006 - 30/11/2006

  • Elaldi F. An Overview For Structural Health Monitoring Of Composites In Aerospace Applications. 2nd International Conference On Recent Advances In Space Technologies/RAST2005: İstanbul; 09/06/2005 - 11/06/2005

  • Durak U, Dayanç K, Elaldi F, Anlağan Ö. Topçu Roketlerinin Atış Kontrol Sistemleri için Yeni Nesil Balistik Çözücü. Birinci Ulusal Savunma Uygulamaları Modelleme ve Simülasyon Konferansı/USMOS 2005: Ankara; 02/06/2005 - 03/06/2005

  • Elaldi F. Yönetsel Değişimler ve Savunma Sanayii. Uluslararası Yönetim ve Askerlik Sempozyumu: Ankara; 26/05/2005 - 27/05/2005

  • Elaldi1 F. Navigation Sensor Systems Use in Artillery Systems to Improve the Accuracy. NATO SET Panel Symposium on Emerging Military Capabilities Enabled by Advances in Navigation Sensors: İstanbul; 14/09/2002 - 16/10/2002

  • Elaldi F. Artillery Automation. AFCEA Symposium on Digital Battlefield, TAFF&AFCEA: Ankara; 29/09/1999 - 30/09/1999

  • Elaldi F, Lee S. Structural Efficiency of Different Assembly Methods For Stiffened Composite Panels: Cocuring And Secondary Bonding. CP 590 AGARD/SMP Specialists? Meeting: Italy; 02/09/1997 - 06/09/1997

  • Elaldı F. Zırh Malzemelerindeki Gelişmeler. Savunma Sanayiindeki Teknolojik Gelişmeler Sempozyumu: Ankara; 05/06/1997 - 06/06/1997

  • Elaldi F. Fabrication And Testing Of Filament Winded Composite Bore Evacuator Chambers For Self Propelled Howitzer Cannons. ESDA Third Biennial European Joint Conference/ASME on Engineering Systems Design And Analysis: France; 01/07/1996 - 04/07/1996

  • Elaldi F, Lee S, Scott R. Scarf Joint Technique With Cocured And Precured Patches For Composite Repair. 79th. Meeting Of The AGARD Structures and Materials Panel: Spain; 03/11/1994 - 05/11/1994

  • Elaldi F, Lee S, Scott R. Manufacture of Composite Panels With J-Stiffeners. CANCOM?93, Second Canadian International Composites Conference and Exhibition: Ottowa; 01/09/1993 - 04/09/1993

  • Lee S, Elaldi F, Villalobos H, Scott R. Experimental And Analytical Study Of J-Stiffened Composite Panels Loaded In Axial Compression. Ninth Int. Conf. On Composite Materials, ICCM-9: Spain; 12/07/1993 - 16/07/1993

  • Elaldi F, Lee S, Scott R. A Review Of Design And Manufacturing ..... 30th. Annual CIM Conference Of Metallurgists: ottowa; 01/11/1991 - 04/11/1991

  • Elaldi F, Vardar Ö. Çentik Geometrisinin Cam Elyaf Takviyeli Polyesterin Kırılma Davranışına Etkisi. İkinci Ulusal Kırılma Konferansı Bildirileri: Trabzon; 01/07/1987 - 03/07/1987